HP Design Jet 800/800ps Plotter Repair Design Jet 800 Plotter Maintenance Service and Repair Near You in Los Angeles, Orange County and Riverside and San Diego Ca.
DesignJet 800 maintenance service error code repair in Southern California!
We specialize on Design Jet 800/800ps plotter repair and maintenance service in Los Angeles, Orange County, Riverside and Inland Empire. Our Design-Jet 800 service technicians are trained to troubleshoot and repair your plotter issues quickly.
Our Design Jet service technicians carry most common parts to solve your Design Jet 800 system error codes and hardware failures on the first visit.
We specialize on Design-Jet 800 plotter repair with carriage jam error and check paper path error due to worn out carriage belts and system service error 11:11, 21:10, 86:01, 81:01 and 79:04 error code.
Our Design-Jet 800 printer service technicians are trained to troubleshoot and replace broken belts, ink tubing system, purge the ink tubing system, carriage Assembly, trailing cable and replace the service station.
We offer fast on-site plotter repair and maintenance service on your design jet 800, 800ps, 500, 510, T1100, T1200, T1300, T770, T790,T795, T2300, Z2100, Z5200, Z5600, T530, T630, T650, T730, T830 and all other newer design jet plotters.
We Provide out Of Warranty 800 Plotter Repairs in Los Angeles and Orange County!
Design Jet 800/800ps repair and maintenance service not covered under warranty or maintenance agreement.
Does your HP Design-Jet plotter needs repair services?
is your HP plotter out of warranty?
Is your Design Jet 800 plotter out of contract, out of care pack?
Or do you simply need a design jet 800 repair with numerical error code?
We offer fast Design Jet plotter repair at your Home or Office
Design Jet repair by knowledgeable HP technicians and original plotter spare part
We Stock HP DesignJet 800 24 Inch Belts and 42 Inch Belt Kits!
Fast on-site DesignJet 800/800ps repair and maintenance service in Southern California!
We keep your design jet 800 plotter printing trouble free with regular service, or if you are having hardware failures due to network setting or plotter driver. Our technicians repair design-jet 800 with error 05:10 bad hard drive, network cards and broken belts.
We fix Design Jet 800 error messages 86:01, 86:13 error codes and carriage jams by replacing the belt kits. We stock 42 inch belts C7780B, C7780BR, C7780C, C7780CR and Design Jet 800/800PS 24-inch belts C7779C, C7779CR, C7779B and C7779BR
FIRMWARE UPDATES ON DESIGN JET 500, 510 and 800
We stock Design-Jet 500, 510 and 800 print heads and update the firmware if your plotter does not read the new print heads due to older firmware. We install the latest firmware A05.01 to get your printer working again.
10 Numerical Service Error Codes We Repair on Design Jet 800 in Southern California!
HP DesignJet 800 system error messages on (42 inch) and (24 inch) plotters!
- HP Design Jet Repair Plotter Repair Fast
- System error 02:13 – Carriage failure.
- System Error 05:10 – HP GL/2 Card or Hard Drive Failure
- System Error 11:11 – Bad trailing cable 24/42 inch
- System Error 21:10 – service station failure.
- System Error 21:11- Service Station/Aerosol Fan cannot be detected
- System Error 22:10 – Ink Supply Station failure.
- System Error 41:10 – Paper axis motor failure.
- System Error 79:04 – Firmware error, it can be a hardware failure.
- System Error 81:01 – Encoder Sensor failure.
- System Error 86:01 paper jam error can be the belt, encoder strip, Main Motor or the carriage
DesignJet Plotter Repair Process Includes Troubleshooting, Inspecting, Cleaning, and Lubricating!
What is included in our HP DesignJet 800 plotter maintenance service?
- Clean Design Jet 800/800ps plotter carriage rails.
- Lubricate the carriage rails on Design-Jet 800ps Plotter.
- Cleaning Design Jet 800 Drive Roller
- Clean Design-Jet 800 encoder strip
- Inspect and clean HP 800 Platen Assembly.
- Clean the entire Design Jet 800 plotter.
- Calibrate the print-head after replacing the belt on Design Jet 800.
- Run Color Calibration test after performing the service on HP 800 plotter.
- Print Design-Jet 800 Quality test printout.
We Specializes on Design-jet 800 Plotter Belt Kit Replacement Service in Southern California!
Regular ceaning and lubrication on DesignJet 800 will prolong the life of your plotter!
| we replace Design Jet 800 24 and 42 inch Belts in Southern California |
|---|
| HP DesignJet 800 (24-inch) Plotter Repair C7779B, C7779BR |
| HP DesignJet 800 (42-inch) Plotter Repair C7779B, C7780B, C7780BR |
| HP DesignJet 800ps (42-inch) Plotter Repair C7780C, C7780CR |
| HP DesignJet 800ps (24-inch) Plotter Repair C7779C |
HP Design Jet 800 Repair and Maintenance Service in Southern California!
We offer DesignJet 800/800ps plotter repair with error code failures!
| HP Design-Jet 800/800ps plotter description | HP 800/800ps plotter models we repair |
|---|---|
| HP Designjet 800 Plotter Repair (24″) | C7779B | C7779BR |
| HP Designjet 800 Plotter Repair (42-inch) | C7780B | C7780BR | C7780C | C7780CR |
| HP Designjet 800PS Repair (24″/A1) | C7779C | C7779CR |
| HP Designjet 815 MFP Plotter Repair | Q1279A | Q1279AR |
| HP Designjet 800 Plotter Repair (24″) | C7779B | C7779BR |
| HP Designjet 800 Plotter Repair (42-inch) | C7780B | C7780BR | C7780C | C7780CR |
| HP Designjet 800PS Plotter Repair (24″) | C7779C | C7779CR |
| HP Designjet 815 MFP Plotter Repair | Q1279A | Q1279AR |
HP DesignJet 800 Plotter Repair with Genuine HP 800 Plotter Parts in Southern California!
HP Design Jet Plotter Error Codes Introduction:
System error codes consist of four digits that explain which component or system is failing and what action should be taken to correct the problem. The information below provides an explanation of the error and the recommended action to be taken.
Continuable and non-continuable HP DesignJet 800 error codes
Some error codes are continual, which means that it is possible to press the Enter key on the front panel and to continue working with the printer. Non-contain
| Design Jet 500/800 Error Messages | HP Design Jet 500/800 Plotter Error Codes |
|---|---|
| system error 01:10 | A problem with the Electronics module has occurred. |
| System error 01:11 | The electronics module has detected a connection problem with the cooling fan. |
| System error 01:12 | The EEROM is not configured correctly. |
| System error 01:13 | A problem with the Electronics module has occurred. |
| System error 02:10 | A problem has occurred with the carriage assembly |
| System error 02:13 | A problem has occurred with the carriage assembly. |
| System error 03:10 | A problem has occurred with the printers power supply. |
| System error 04:11 | Jet direct network card not detected. |
| System error 05:09 (DJ 500 only) | Formatter installed instead of HP-GL/2 accessory card. |
| System error 05:10 (DJ 800 only) | Formatter card failure, or Formatter card not detected |
| System error 05:10 (DJ 500 only) | HP-GL/2 accessory card failure |
| System error 06:03 (DJ 800 only) | Hard disk error |
| System error 08:11 | The front panel cannot be detected. |
| System error 11:11 | The trailing cable is poorly connected |
| System error 11:13 | Problem with setting the voltage of the printheads |
| System error 12:11 | A short has been detected in the carriage assembly. |
| System Error 17:11(DJ 500 only) | A problem has been detected while initializing. |
| System error 21:10 | A problem has been detected with the Service Station assembly. |
| System error 21:11 | A problem has been detected with the Service Station assembly. |
| System error 22:10 | A problem has been detected with the Ink Supply Station. |
| System error 41:10 | A problem has been detected with the Paper-Axis motor |
| System error 41:13 | An error in the paper-axis motor encoder quadrature has occurred. |
| System error 42:10 | A problem has occurred with the Scan-Axis motor. |
| System error 43:10 | A problem has occurred with the Vacuum fan. |
| System error 43:11 | The Vacuum fan is not detected. |
| System error 55:11 | A problem with the line sensor has occurred. |
| System error 56:10 | Drive roller encoder sensor error. |
| System error 56:13 | An error in the drive roller encoder sensor quadrature has occurred. |
| System error 61:04 | Firmware error. |
| System error 61:05 | The printer was not able to process a job that was sent. |
| System error 62:03 | Parallel port communication problem |
| System error 63:03 | LAN card communication problem. |
| System error 64:03 | USB port communication problem. |
| System error 64:04 | Firmware error (USB port). |
| System error 65:03 | Generic input/output port communication problem. |
| System error 71:04 | Problem allocating memory. |
| System error 71:06 | Out of memory problem. |
| System error 72:04 | Problem in the scan-axis (firmware error). |
| System error 73:04 | Server error. |
| System error 79:04 | Miscellaneous firmware error. |
| System error 81:01 | Paper-axis shutdown. |
| System error 81:11 | Paper-axis shutdown (during the paper advance test). |
| System error 85:10 | Paper-axis shutdown (during the paper advance test). |
| System error 86:01 | Carriage-Axis shutdown. |
| System error 86:11 | Carriage-axis shutdown (during the carriage movement test). |
| System error 86:13 | Carriage-Axis shutdown (firmware error). |
| System error 87:13 | Unable to read the carriage encoder sensor. |
| System error 93:10 | Ink System startup failed. |
6 Months Warranty on Every DesignJet Plotter Repair with Carriage Belt Replacement in Southern California!
No additional trip charge for Design Jet plotter warranty repair!
If your Design Jet 800 belt is shredding, breaking or tearing apart we can replace the belt kit and lubricate your plotter carriage rails. We use genuine HP Design-Jet 800 belt kits to ensure you plotter is fully operable.
After we replace Design Jet 800/800ps carriage belt we lubricate the rail and runs carriage alignment test to ensure that the belt is moving smoothly.
